Wired Remote Control Casing Rotator With Φ800mm - Φ1500mm Drill Hole
The casing rotator is a new type drill with the integration of the full hydraulic power and transmission, and the combination control of machine, power and fluid. It is a new, environmentally-friendly and highly efficient drilling technology. In recent years, it is widely adopted in the projects such as the constructions of urban subway, articulation pile of deep foundation pit enclosure, clearance of waste piles ( underground obstructions ), high-speed rail, road and bridge, and urban construction piles, as well as the reinforcement of reservoir dam.
| Casing Rotator |
| TR | Rotary Torque - KN.m - | Dia. of drill hole - mm - | Engine Power Kw/rpm |
| TR1305L | 1770/1050/590 | Φ600-Φ1300 | 180/1480 |
| TR1505 | 1500/975/600 Instantaneous 1800 | Φ800-Φ1500 | 183.9/2000 |
| TR2005H | 2965/1752/990 Instantaneous 3391 | Φ1000-Φ2000 | 272/1800 |
| TR2605H | 5292/3127/1766 Instantaneous 6174 | Φ1200-Φ2600 | 441/1800 |
| TR1505 |
| Working device | Diameter of drill hole | mm | Φ800-Φ1500 |
| Rotary torque | KN.m | 1500/975/600 Instantaneous 1800 |
| Rotary speed | rpm | 1.6/2.46/4.0 |
| Lower pressure of sleeve | KN | Max.360KN+Dead weight210KN |
| Pulling force of sleeve | KN | 2444 Instantaneous 2690 |
| Pressure-pulling stroke | mm | 750 |
| Weight | ton | 31+(selection and installation of track)7 |
| Hydraulic power station | Engine model | | ISUZU AA-6HK1XQP |
| Engine Power | Kw/rpm | 183.9/2000 |
| Full consumption of engine | g/kwh | 226.6(when the maximum power rate) |
| Weight | ton | 7 |
| Control mode | | Wired remote control |
