Silent Durable Casing Rotator No Vibration High Safety Without Mud
The advantages of adopting the casing rotator for construction
1) No noise, no vibration, and high safety;
2) Without mud, clean working surface, good environmental friendliness, avoiding the possibility for mud to enter the concrete, high pile quality, enhancing the bond stress of concrete to the steel bar;
3) During construction drilling, the characteristics of stratum and rock can be directly distinguished;
4) The drilling speed is fast and reaches about 14m/h for the general soil layer;
5) The drilling depth is large and reaches about 80m according to the situation of soil layer;
6) The hole forming verticality is easy to master, which can be accurate to 1/500;
7) No hole collapse will be caused, and the hole forming quality is high.
8) The hole forming diameter is standard, with little filling factor. Being compared with other hole forming methods, it can save a lot of concrete usage;
9) The hole clearing is thorough and fast. The drilling mud at the hole bottom can be clear to about 3.0cm.
Technical parameters
| TR1305H |
| Working device | Diameter of drill hole | mm | Φ600-Φ1300 |
| Rotary torque | KN.m | 1400/825/466 Instantaneous 1583 |
| Rotary speed | rpm | 1.6/2.7/4.8 |
| Lower pressure of sleeve | KN | Max.540 |
| Pulling force of sleeve | KN | 2440 Instantaneous 2690 |
| Pressure-pulling stroke | mm | 500 |
| Weight | ton | 25 |
| Hydraulic power station | Engine model | | Cummins QSB6.7-C260 |
| Engine Power | Kw/rpm | 201/2000 |
| Fuel consumption of engine | g/kwh | 222 |
| Weight | ton | 8 |
| Control mode | | Wired remote control/ Wireless remote control |
| TR1605H |
| Diameter of drill hole | mm | Φ800-Φ1600 | |
| Rotary torque | KN.m | 1525/906/512 Instantaneous 1744 | |
| Rotary speed | rpm | 1.3/2.2/3.9 | |
| Lower pressure of sleeve | KN | Max.560 | |
| Pulling force of sleeve | KN | 2440 Instantaneous 2690 | |
| Pressure-pulling stroke | mm | 500 | |
| Weight | ton | 28 | |
| Engine model | | Cummins QSB6.7-C260 | |
| Engine Power | Kw/rpm | 201/2000 | |
| Fuel consumption of engine | g/kwh | 222 | |
| Weight | ton | 8 | |
| Control mode | | Wired remote control/ Wireless remote control | |
| TR1805H |
| Diameter of drill hole | mm | Φ1000-Φ1800 | |
| Rotary torque | KN.m | 2651/1567/885 Instantaneous 3005 | |
| Rotary speed | rpm | 1.1/1.8/3.3 | |
| Lower pressure of sleeve | KN | Max.600 | |
| Pulling force of sleeve | KN | 3760 Instantaneous 4300 | |
| Pressure-pulling stroke | mm | 500 | |
| Weight | ton | 38 | |
| Engine model | | Cummins QSM11-335 | |
| Engine Power | Kw/rpm | 272/1800 | |
| Fuel consumption of engine | g/kwh | 216 | |
| Weight | ton | 8 | |
| Control mode | | Wired remote control/ Wireless remote control | |
| TR2005H |
| Diameter of drill hole | mm | Φ1000-Φ2000 | |
| Rotary torque | KN.m | 2965/1752/990 Instantaneous 3391 | |
| Rotary speed | rpm | 1.0/1.7/2.9 | |
| Lower pressure of sleeve | KN | Max.600 | |
| Pulling force of sleeve | KN | 3760 Instantaneous 4300 | |
| Pressure-pulling stroke | mm | 600 | |
| Weight | ton | 46 | |
| Engine model | | Cummins QSM11-335 | |
| Engine Power | Kw/rpm | 272/1800 | |
| Fuel consumption of engine | g/kwh | 216 | |
| Weight | ton | 8 | |
| Control mode | | Wired remote control/ Wireless remote control | |
| TR2105H |
| Diameter of drill hole | mm | Φ1000-Φ2100 | |
| Rotary torque | KN.m | 3085/1823/1030 Instantaneous 3505 | |
| Rotary speed | rpm | 0.9/1.5/2.7 | |
| Lower pressure of sleeve | KN | Max.600 | |
| Pulling force of sleeve | KN | 3760 Instantaneous 4300 | |
| Pressure-pulling stroke | mm | 500 | |
| Weight | ton | 48 | |
| Engine model | | Cummins QSM11-335 | |
| Engine Power | Kw/rpm | 272/1800 | |
| Fuel consumption of engine | g/kwh | 216 | |
| Weight | ton | 8 | |
| Control mode | | Wired remote control/ Wireless remote control | |
| TR2605H |
| Diameter of drill hole | mm | Φ1200-Φ2600 | |
| Rotary torque | KN.m | 5292/3127/1766 Instantaneous 6174 | |
| Rotary speed | rpm | 0.6/1.0/1.8 | |
| Lower pressure of sleeve | KN | Max.830 | |
| Pulling force of sleeve | KN | 4210 Instantaneous 4810 | |
| Pressure-pulling stroke | mm | 750 | |
| Weight | ton | 56 | |
| Engine model | | Cummins QSB6.7-C260 | |
| Engine Power | Kw/rpm | 194/2200 | |
| Fuel consumption of engine | g/kwh | 222 | |
| Weight | ton | 8 | |
| Control mode | | Wired remote control/ Wireless remote control | |
| TR3205H |
| Diameter of drill hole | mm | Φ2000-Φ3200 | |
| Rotary torque | KN.m | 9080/5368/3034 Instantaneous 10593 | |
| Rotary speed | rpm | 0.6/1.0/1.8 | |
| Lower pressure of sleeve | KN | Max.1100 | |
| Pulling force of sleeve | KN | 7237 Instantaneous 8370 | |
| Pressure-pulling stroke | mm | 750 | |
| Weight | ton | 96 | |
| Engine model | | Cummins QSM11-335 | |
| Engine Power | Kw/rpm | 2X272/1800 | |
| Fuel consumption of engine | g/kwh | 216X2 | |
| Weight | ton | 13 | |
| Control mode | | Wired remote control/ Wireless remote control | |
